news center
Company news Industry dynamic
07-25
2019year
Introduction to air motor insulation characteristics of clea
2019-07-25
Insulation blower to clean dust and sludge of motor insulation damage as follows: 1) insulation on the surface of the dust and oil steam and water for a long time, the formation of scale, gradually ope...
07-25
2019year
What are the requirements for introduction to explosion-proo
2019-07-25
Explosion-proof motor at work is a requirement for the environment, ordinary motor work sites also has a lot of explosion-proof motor. The application of explosion-proof motor places also more and more...
07-25
2019year
Briefly describes how to choose when buying explosion-proof
2019-07-25
Many customers when buying explosion-proof motor, I dont know the explosive-proof grade is what meaning, dont know what I should use level of explosion-proof motor, explain for everybody below motor of...
07-05
2019year
Selection of enclosures in different environments for explos
2019-07-05
The enclosure is explosion-proof motor fittings, explosion-proof motor is set weight compared to the customer in the unit, the enclosure is damaged, we will want to swap a motor housing. The case is di...
07-05
2019year
Brief lyme of the shell of an explosion-proof motor
2019-07-05
The explosion-proof machine can select directly increases the peaceful connecting box.This time the electrical machinery called the multi-skill explosion-proof electrical machinery - the main body for ...
07-05
2019year
Why does the explosion-proof motor base deform?
2019-07-05
In Explosion-proof motor during use, stand by the cause of the problem is mainly manifested in its distortion, the distortion will have a direct impact on the functioning of the explosion-proof motor. ...
07-01
2019year
The selection method of motor is introduced
2019-07-01
To select a motor, you must first acknowledge the torque of the motor operating point and the required motor speed (i.e. the rated speed) under this torque. Based on this can be recognized requirements...
07-01
2019year
The reason of deformation of explosion-proof motor frame is
2019-07-01
During the use of explosion-proof motor, the main fault caused by the frame is its deformation, which will directly affect the operation of the explosion-proof motor. So, what causes the frame to defor...
07-01
2019year
The protection measures for dust explosion-proof motor shell
2019-07-01
With regard to the explosion-proof form tD, there are two different schemes in this section, both of which provide a level of energy efficiency protection. Enclosure for type A and all other equipment ...
07-01
2019year
The difference between copper wire and green wire of explosi
2019-07-01
Six square meters of copper wire is equivalent to ten square meters of aluminum wire. Aluminum wire diameter than copper wire, the same stator slot aluminum wire will not fit. The resistivity of copper...
  • Home
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • Next
  • Last Page