Motor is usually packaged by the manufacturer after shipment, manufacturers will be packed tightly, so in the delivery of high-voltage motor as far as possible do not open the box, so as to better protect the safety of the motor in transit. Next and maiteng electromechanical small make up a look at the high voltage motor in transit need to pay attention to the key ~

　　When packing and transporting, the motor must be firmly fixed on the wooden beam at the bottom of the box. Damp-heat belt motor packing, should also be put in moisture-proof agent.

　　Avoid turning the motor over and damaging the motor.

　　In general, the motor should be shipped after complete installation, can not be shipped in the case of disassembly, because the motor in the factory before the factory has been inspected, testing and packing procedures. For the air-air-cooled motor and water-air-cooled motor, if it is difficult to transport, it is allowed to disassemble the cooler and air cover for transport, but it is necessary to avoid the loss of foreign bodies into the motor and accessories.

　　Water - air - cooled motor must be transported before the cooler inside the cooling water clean.

　　The motor with sliding bearing must be cleaned before delivery, and the shaft neck and bearing bush should be coated with grease to avoid corrosion.