Do you have any information about the storage and delivery of high voltage motor? If you don't know, let's look at the summary for you on the high voltage motor storage and transport notice!

　　The high voltage motor is shipped by the manufacturer after consolidation of the wooden box. It is forbidden to unpack the box in transit, otherwise the high voltage motor will be easily damaged in transit. After the high voltage motor is unpacked, dust and dirt will be removed immediately, and the exposed surface will be wiped clean, the temporary coating on the original as well as the appearance of moisture, rust stains. 'if you use oil or gasoline to wipe off the oil and still rust stains, you can use no. 00 fine abrasive cloth to gently wipe off. If the high voltage motor is not installed immediately after delivery, it should also be unpacked and checked as above, and the exposed metal surface should be covered from top to bottom with anti-rust oil or temporary sealing information.

　　If the high voltage motor is not installed immediately after delivery, it should also be unpacked and checked as above, and the exposed metal surface should be covered from top to bottom with anti-rust oil or temporary sealing information. After inspection and sealing, the high voltage motor can be boxed and sealed in a clean and clean place. The air at the packing address should not contain corrosive gases such as acid and alkali, to avoid damaging the insulation and exposed conductive parts. Warehouse temperature should often keep in ten more than 3 ℃, the air should be dry, ventilation, outstanding should be checked out once every six months, check whether temporary coating sealing metamorphosis, in order to improve save the situation in a timely manner. When transporting, it is necessary to avoid turning over and damaging the motor. When packing and transporting, it is necessary for the high voltage motor to be firmly fixed on the wooden beam at the bottom of the box. When the high pressure motor with hot and humid zone is packed, it should also put human moisture absorbent.